Power Industry Silicone Sealants, Adhesives, Coatings & Compounds on CSL Silicones Inc.

Download PDF Email

Email This Page

Save To Favorites


	Power Industry Silicone Sealants, Adhesives, Coatings & Compounds
	Check up to five results to perform an action.

	larger image		These highly engineered products are designed to improve the insulating performance of high voltage insulators in wet and contaminated environments. The High Voltage Insulator Greases in this category of CSL product are designed to act as medium-term or interim solutions to reduce the surface electrical activity due to wet and contaminated high voltage insulators. These grease products are non-curing and are intended to provide a much better solution than washing of insulators. Under deenergized conditions, maintenance staff can apply the products by hand or by spray. However, due to their temporary nature, it is recommended these materials only be used as a stop-gap measure. Please see our "Si-COAT (570) HVIC" for a permanent, long-life solution (www.si-coat.com). Additionally, products are available for polymer (composite) insulator assembly, which yield higher performing finished insulators. A major factor of polymer insulator failure is water/moisture ingress between the core and polymer housing, which leads to ‘brittle fracture’. With the aid of CSL’s novel products, this issue can be eliminated while at the same time improving the efficiency and ease of the polymer insulator manufacturing process.

Results Per Page :

Item #

Polymer Insulator Assembly Sealant/Adhesive

Clear

Highly effective as a lubricating agent to assist in sliding polymer housings for composite insulators over the insulator core
RTV formulation will then cure after assembly is complete, forming an impermeable bond and seal between housing and core
Essential for correcting moisture ingress issues associated with polymer insulator failures

Low Viscosity Polymer Insulator Assembly Sealant/Adhesive

Grey

Highly effective as a lubricating agent to assist in sliding polymer housings for composite insulators over the insulator core
RTV formulation will then cure after assembly is complete, forming an impermeable bond and seal between housing and core
Essential for correcting moisture ingress issues associated with polymer insulator failures

High Voltage Insulator Compound

White

Developed for the maintenance of high voltage insulators
Its grease-like formulation gives porcelain insulators long-term resistance to water filming, thereby suppressing leakage current

Sprayable High Voltage Insulator Compound

White

Developed for the maintenance of high voltage insulators
Its grease-like formulation gives porcelain insulators long-term resistance to water filming, thereby suppressing leakage current